How to use ultrasonic cleaner?

1.Fill stainless steel tank with liquid; Plug the cleaner into grounded outlet; After powing on, the temperature displays the actual environment temperature. LED display 3minutes,which is defaults time.

2.Time setting: Press the “ TEMER+ ”“TEMER-” shortly at a time means time increase/reduce 1minute at a time, press and hold means time will increase/reduce by 1minutes continuously.

The cleaning stops when the timer counts down to 00:00.If the unit needs to be stopped before the timer runs up, press ON/OFF button.

Note: Do not run the cleaner continuously for more than one hour

3.Set temperature: press “ TEMP+” “ TEMP-” key shortly at a time means time increase/reduce 1°C at a time, press and hold there means temperature will increase/reduce by 1°C continuously. When actual temperature is higher than the setting time, The operation is invalid. The indicator light will be off when the temperature reach the setting temperature. The LED panel display the actual temperature when ultrasonic is working.

4.After Time and heat setting , press ON/OFF key to start both function. Press ”Heating” button ”OFF”, the heating function will stop .The same for Ultrasonic function.

5.Empty the tank and clean both the outside and inside of the cleaner with clean and dry cloth for next use.

Note: Do not pour water out until it’s cooling, Hot water will hurt you and damage the machine itself.

DIFFERENT WAYS OF CLEANING

GENNRAL CLEANING—use only tap water. Use warm temperature about 50℃.

ENHANCED CLEANING—add few drops of standard washing up liquid,liquid soap,or detergent into water, other non-acidic cleaning agents can also be used.

EXTENSIVE CLEANING—removing tarnish, carbon & rust from non-plated metals, it is recommended to use specialist cleaning solution in associated using ultrasonic cleaner.

The cleaning solution will deteriorate in effectiveness over time and use. It is important to regularly change the fluid and carefully wash the inside of the cleaning tank in order to preserve the effectiveness.

And longevity of the cleaner. Do not use corrosive or abrasive cleaning products on the tank, which must be wiped down and dried before it can be reconnected to the electrical supply.

Ultrasonic cleaning is a popular method in many fields. Used in jewelry, watchmaking, medicine and even industrial fields, it can effectively remove dirt on small parts. This very effective method is also convenient and quick.

You can use an ultrasonic cleaner to clean almost anything.

The following list lists the most common items that benefit from ultrasonic cleaning:

The following list lists the most common items that benefit from ultrasonic cleaning:

· Musical instruments

· Taps, molds, cutting tools(machining)

· Weapons and Armory

· Engine block

· Carburetor

· Spare parts for used cars

· Jewelry (gold, silver and platinum)

· Waterproof watch (WATERPROOF)

· CD and DVD

· Casino chips

· Medical equipment/medical equipment (Note: Ultrasonic cleaning is not allowed to be sterilized, it must be sterilized in an autoclave)

· Dentures

· Printed circuit boards/electronic components

· Golf Club

· Ceramic products

· Tattoo instruments (note: ultrasonic cleaning is not allowed to be sterilized, it must be sterilized in an autoclave)

· Print head

· Diving respirator, oxygen mask

· Bikes, cars, motorcycles, aircraft parts